Filter
Top Products
show logging xml
CF-704
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show logging xml
To display the state of system message logging in an XML format, and to display the contents of the
XML syslog buffer, use the show logging xml command in privileged EXEC mode.
show logging xml
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command displays the same syslog state information as the standard show logging command, but
displays the information in XML format. This command also displays the content of the XML syslog
buffer (if XML-formatted buffer logging is enabled).
Examples The following example compares the output of the standard show logging command with the output of
the show logging xml command so that you can see how the standard information is formatted in XML.
Router# show logging
Syslog logging: enabled (10 messages dropped, 6 messages rate-limited, 0 flushes, 0
overruns, xml enabled)
Console logging: level debugging, 28 messages logged, xml enabled
Monitor logging: level debugging, 0 messages logged, xml enabled
Buffer logging: level debugging, 2 messages logged, xml enabled (2 messages logged)
Logging Exception size (8192 bytes)
Count and timestamp logging messages: disabled
Trap logging: level informational, 35 message lines logged
Logging to 10.2.3.4, 1 message lines logged, xml disabled
Logging to 192.168.2.1, 1 message lines logged, xml enabled
Log Buffer (8192 bytes):
00:04:20: %SYS-5-CONFIG_I: Configured from console by console
00:04:41: %SYS-5-CONFIG_I: Configured from console by console
Router# show logging xml
<syslog-logging status="enabled" msg-dropped="10" msg-rate-limited="6" flushes="0"
overruns="0"><xml>enabled</xml></syslog-logging>
<console-logging level="debugging"
messages-logged="28"><xml>enabled</xml></console-logging>
<monitor-logging level="debugging"
messages-logged="0"><xml>enabled</xml></monitor-logging>
<buffer-logging level="debugging" messages-logged="2"><xml
messages-logged="2">enabled</xml></buffer-logging>
Release Modification
12.2(15)T This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.