Filter
Top Products
show platform software mount
CF-814
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show platform software mount
To display the mounted file systems, both physical and virtual, for a Cisco ASR 1000 Series SPA
Interface Processor (SIP), Cisco ASR 1000 Series Embedded Services Processor (ESP), or
Cisco ASR 1000 Series Route Processor (RP), use the show platform software mount command in
privileged EXEC or diagnostic mode.
show platform software mount [slot [brief]]
Syntax Description
Command Default No default behavior or values.
Command Modes Privileged EXEC (#)
Diagnostic (diag)
Command History
Usage Guidelines If no slot is specified, the command returns mounted file systems for the active RP.
This command allows you to ascertain the presence or absence of specific system mounts. For example,
this command might be used to determine /tmp-related mounts, which are used to create many run-time
directories and files.
slot (Optional) Displays mounted file systems for the specified slot. Possible slot
values are:
• 0—Cisco ASR 1000 Series SIP slot 0
• 1—Cisco ASR 1000 Series SIP slot 1
• 2—Cisco ASR 1000 Series SIP slot 2
• f0—Cisco ASR 1000 Series ESP slot 0
• f1—Cisco ASR 1000 Series ESP slot 1
• fp active—Active Cisco ASR 1000 Series ESP
• fp standby—Standby Cisco ASR 1000 Series ESP
• r0—Cisco ASR 1000 Series RP slot 0
• r1—Cisco ASR 1000 Series RP slot 1
• rp active—Active Cisco ASR 1000 Series RP
• rp standby—Standby Cisco ASR 1000 Series RP
brief (Optional) Displays abbreviated mounted file system information.
Release Modification
Cisco IOS XE
Release 2.1
This command was introduced on the Cisco ASR 1000 Series Routers.