Filter
Top Products
show rom-monitor
CF-866
Cisco IOS Configuration Fundamentals Command Reference
July 2008
Usage Guidelines Use the show rom-monitor command when you are in Cisco IOS software. Use the showmon command
when you are in ROMMON mode.
Examples The following sample output from the show rom-monitor command in Cisco IOS software, applicable
to both the Cisco 7200 VXR and Cisco 7301 routers, displays both ROMMON images and verifies that
the Upgrade ROMMON image is running:
Router> show rom-monitor
ReadOnly ROMMON version:
System Bootstrap, Version 12.2(20031011:151758)
Copyright (c) 2004 by Cisco Systems, Inc.
Upgrade ROMMON version:
System Bootstrap, Version 12.2(20031011:151758)
Copyright (c) 2004 by Cisco Systems, Inc.
Currently running ROMMON from Upgrade region
ROMMON from Upgrade region is selected for next boot
In the following example, the ROMmon image in RP 0 of a Cisco ASR 1006 Router is verified using the
show rom-monitor command:
Router# show rom-monitor r0
System Bootstrap, Version 12.2(33r)XN1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2007 by cisco Systems, Inc.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Cisco IOS XE Release
2.1
This command was introduced on the Cisco ASR1000 Series Routers and the
following enhancements were introduced:
• This command was introduced in diagnostic mode for the first time. The
command can be entered in both privileged EXEC and diagnostic mode
on the Cisco ASR1000 Series Routers.
• The slot keyword was introduced.
Release Modification