Filter
Top Products
show rom-monitor slot
CF-867
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show rom-monitor slot
To display the ROM monitor (ROMMON) status, use the show rom-monitor command in user EXEC
or privileged EXEC mode.
show rom-monitor slot num {sp | rp}
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines When you enter the show rom-monitor slot command, the output displays the following:
• Region region1 and region2—Displays the status of the ROMMON image and the order of
preference from which the region1 or region2 images should be booted. The ROMMON image status
values are as follows:
–
First run—Indicates that a check of the new image is being run.
–
Invalid—Indicates that the new image has been checked and the upgrade process has started.
–
Approved—Indicates that the ROMMON field upgrade process has completed.
• Currently running—This field displays the currently running image and the region.
The sp or rp keyword is required only if a supervisor engine is installed in the specified slot.
Examples This example shows how to display ROMMON information:
Router# show rom-monitor slot 1 sp
Region F1:APPROVED
Region F2:FIRST_RUN, preferred
Currently running ROMMON from F1 region
Router#
num Displays the slot number of the ROMMON for which the status is to be displayed.
sp Displays the ROMMON status of the switch processor.
rp Displays the ROMMON status of the route processor.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was integrated into
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.