Filter
Top Products
show platform
CF-795
Cisco IOS Configuration Fundamentals Command Reference
July 2008
Table 120 describes the significant fields shown in the display.
This example shows how to display CPU EEPROM information:
Router# show platform eeprom
MSFC CPU IDPROM:
IDPROM image:
IDPROM image block #0:
hexadecimal contents of block:
00: AB AB 02 9C 13 5B 02 00 00 02 60 03 03 E9 43 69 .....[....`...Ci
10: 73 63 6F 20 53 79 73 74 65 6D 73 00 00 00 00 00 sco Systems.....
20: 00 00 57 53 2D 58 36 4B 2D 53 55 50 33 2D 50 46 ..WS-X6K-SUP3-PF
30: 43 33 00 00 00 00 53 41 44 30 36 34 34 30 31 57 C3....SAD064401W
40: 4C 00 00 00 00 00 00 00 00 00 37 33 2D 37 34 30 L.........73-740
50: 34 2D 30 37 00 00 00 00 00 00 30 35 00 00 00 00 4-07......05....
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 02 BD 00 00 00 00 00 09 00 05 00 01 ................
80: 00 03 00 01 00 01 00 02 03 E9 00 00 00 00 00 00 ................
90: 00 00 00 00 00 00 00 00 00 00 00 00 ............
block-signature = 0xABAB, block-version = 2,
block-length = 156, block-checksum = 4955
*** common-block ***
IDPROM capacity (bytes) = 512 IDPROM block-count = 2
FRU type = (0x6003,1001)
OEM String = 'Cisco Systems'
Product Number = 'WS-X6K-SUP3-PFC3'
Serial Number = 'SAD064401WL'
Manufacturing Assembly Number = '73-7404-07'
Manufacturing Assembly Revision = '05'
Table 120 show platform copp rate-limit Field Descriptions
Field Description
Rate Limiter Status Indicates if a rate limiter has been enabled on the interface.
Rate Indicates the configured rate in pps or bps.
Max Observation Period Indicates the configured observation period before automati-
cally turning off the per-interface rate limiter.
Per Interface Rate Limiter Information Displays the list of interfaces on which the rate limiter is
active. In this example:
• GigabitEthernet5/1.1 is free from attack.
• GigabitEthernet5/2.1 has an exceed count of 4, and has a
rate limiter enabled. The observation period is 35
minutes, which indicates that currently the interface is
free from attack and is being kept under observation. The
interface will remain under observation for an additional
35 minutes. If it remains free from attack after that time,
the rate limiter is automatically removed.
• GigabitEthernet5/2.2 has an exceed count of 16 and has
a rate limiter enabled. The observation period has been
designated as Max. This indicates that the interface is
still under attack and has not yet entered the observation
time window.