Filter
Top Products
show idprom
CF-687
Cisco IOS Configuration Fundamentals Command Reference
July 2008
Manufacturing Assembly Deviation = '00'
Hardware Revision = 0.95
Manufacturing bits = 0x0 Engineering bits = 0x0
SNMP OID = 9.5.1.3.1.1.2.1103
Power Consumption = -631 centiamperes RMA failure code = 0-0-0-0
CLEI =
VID =
*** end of common block ***
IDPROM image block #1:
block-signature = 0x6003, block-version = 2,
block-length = 103, block-checksum = 2556
*** linecard specific block ***
feature-bits = 00000000 00000000
hardware-changes-bits = 00000000 00000000
card index = 158
mac base = 0012.4310.D840
mac_len = 128
num_processors = 1
epld_num = 0
epld_versions = 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000
port numbers:
pair #0: type=00, count=00
pair #1: type=00, count=00
pair #2: type=00, count=00
pair #3: type=00, count=00
pair #4: type=00, count=00
pair #5: type=00, count=00
pair #6: type=00, count=00
pair #7: type=00, count=00
sram_size = 0
sensor_thresholds =
sensor #0: critical = 75 oC, warning = 60 oC
sensor #1: critical = 70 oC, warning = 55 oC
sensor #2: critical = 80 oC, warning = 65 oC
sensor #3: critical = 75 oC, warning = 60 oC
sensor #4: critical = -128 oC (sensor not present), warning = -128 oC (sensor not
present)
sensor #5: critical = -128 oC (sensor not present), warning = -128 oC (sensor not
present)
sensor #6: critical = -128 oC (sensor not present), warning = -128 oC (sensor not
present)
sensor #7: critical = -128 oC (sensor not present), warning = -128 oC (sensor not
present)
max_connector_power = 3600
cooling_requirement = 35
ambient_temp = 55
*** end of linecard specific block ***
End of IDPROM image
The following example shows sample output for a 4-Port OC-3c/STM-1 ATM SPA installed in subslot 0
of the SIP installed in slot 5 of the router:
Router# show idprom module 5/0
IDPROM for SPA module #5/0
(FRU is '4-port OC3/STM1 ATM Shared Port Adapter')
Product Identifier (PID) : SPA-4XOC3-ATM
Version Identifier (VID) : V01
PCB Serial Number : PRTA2604138