Filter
Top Products
show tech-support
CF-906
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show controllers tech-support Displays general information about a VIP card for problem
reporting.
show decnet traffic Displays the DECnet traffic statistics (including datagrams sent,
received, and forwarded).
show disk:0 Displays flash or file system information for a disk located in slot 0:
show dmvpn details Displays detail DMVPN information for each session, including
Next Hop Server (NHS) and NHS status, crypto session information,
and socket details.
show environment Displays temperature, voltage, and blower information on the
Cisco 7000 series routers, Cisco 7200 series routers, Cisco 7500
series routers, Cisco 7600 series routers, Cisco AS5300 series access
servers, and the Gigabit Switch Router.
show fabric channel counters Displays the fabric channel counters for a module.
show file system Lists available file systems.
show interfaces Displays statistics for all interfaces configured on the router or
access server.
show interfaces switchport Displays the administrative and operational status of a switching
(nonrouting) port.
show interfaces trunk Displays the interface-trunk information.
show inventory Displays the product inventory listing and UDI of all Cisco products
installed in the networking device.
show ip interface Displays the usability status of interfaces configured for IP.
show ip traffic Displays statistics about IP traffic.
show logging Displays the state of syslog and the contents of the standard system
logging buffer.
show mac-address table Displays the MAC address table.
show module Displays module status and information.
show power Displays the current power status of system components.
show processes cpu Displays information about the active processes.
show processes memory Displays the amount of memory used.
show running-config Displays the current configuration of your routing device.
show spanning-tree Displays information about the spanning tree state.
show stacks Displays the stack usage of processes and interrupt routines.
show version Displays the configuration of the system hardware, the software
version, the names and sources of configuration files, and the boot
images.
show vlan Displays VLAN information.
Command Description