Filter
Top Products
show parser dump
CF-783
Cisco IOS Configuration Fundamentals Command Reference
July 2008
enable : Enable control packets exchange (default)
.
.
.
! Ctrl-Z used here to interrupt output and return to CLI prompt.
Router# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# rtr 1
Router(config-rtr)# type udpEcho ?
dest-ipaddr Destination address
Router(config-rtr)# type udpEcho dest-ipaddr ?
Hostname or A.B.C.D IP address or hostname
Router(config-rtr)# type udpEcho dest-ipaddr HOSTNAME ?
dest-port Destination Port
Router(config-rtr)# type udpEcho dest-ipaddr HOSTNAME dest-port ?
<1-65535> Port Number
Router(config-rtr)# type udpEcho dest-ipaddr HOSTNAME dest-port 1 ?
control Enable or disable control packets
source-ipaddr Source address
source-port Source Port
<cr>
Router(config-rtr)# type udpEcho dest-ipaddr HOSTNAME dest-port 1 control ?
disable Disable control packets exchange
enable Enable control packets exchange (default)
In the following example, show parser dump output is redirected to a file on a remote TFTP server:
show parser dump exec extend | redirect
tftp://209.165.200.225/userdirectory/123-exec-commands.txt
Related Commands Command Description
show <command> append Redirects and adds the output of any show command to an existing
file.
show <command> redirect Redirects the output of any show command to a file.
show <command> tee Copies the output of any show command to a file while displaying it
on the terminal.
show <command> include Filters show command output so that only lines that containing the
specified string are displayed.
show <command> begin Filters the output of any show command to display the output from the
first instance of a specified string.
show <command> exclude Filters show command output so that it excludes lines that contain a
particular regular expression.