Filter
Top Products
show platform hardware capacity
CF-799
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show platform hardware capacity
To display the capacities and utilizations for the hardware resources, use the show platform hardware
capacity command in privileged EXEC mode.
show platform hardware capacity [resource-type]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines The valid values for resource-type are as follows:
• acl—Displays the capacities and utilizations for ACL/QoS TCAM resources.
• cpu—Displays the capacities and utilizations for CPU resources.
• eobc—Displays the capacities and utilizations for EOBC resources.
• fabric—Displays the capacities and utilizations for Switch Fabric resources.
• flash—Displays the capacities and utilizations for Flash/NVRAM resources.
• forwarding—Displays the capacities and utilizations for Layer 2 and Layer 3 forwarding resources.
• interface—Displays the capacities and utilizations for interface resources.
• monitor—Displays the capacities and utilizations for SPAN resources.
• multicast—Displays the capacities and utilizations for Layer 3 multicast resources.
• netflow—Displays the capacities and utilizations for NetFlow resources.
• pfc—Displays the capacities and utilizations for all the PFC resources including Layer 2 and
Layer 3 forwarding, NetFlow, CPU rate limiters, and ACL/QoS TCAM resources.
• power—Displays the capacities and utilizations for power resources.
• qos—Displays the capacities and utilizations for QoS policer resources.
• rate-limiter—Displays the capacities and utilizations for CPU rate limiter resources.
• system—Displays the capacities and utilizations for system resources.
• vlan—Displays the capacities and utilizations for VLAN resources.
resource-type (Optional) Hardware resource type; see the “Usage Guidelines” section for
the valid values.
Release Modification
12.2(18)SXF Support for this command was introduced on the Supervisor Engine 720
and the Supervisor Engine 2.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.