Filter
Top Products
show platform hardware capacity
CF-801
Cisco IOS Configuration Fundamentals Command Reference
July 2008
• Module-specific switching information, including the following information:
–
Part number (WS-SUP720-BASE, WS-X6548-RJ-45, and so forth)
–
Series (supervisor engine, fabric, CEF720, CEF256, dCEF256, or classic)
–
CEF Mode (central CEF, dCEF)
The show platform hardware capacity vlan command displays the following VLAN information:
• Total VLANs
• VTP VLANs that are used
• External VLANs that are used
• Internal VLANs that are used
• Free VLANs
Examples This example shows how to display CPU capacity and utilization information for the route processor,
the switch processor, and the LAN module in the Cisco 7600 series router:
Router# show platform hardware capacity cpu
CPU Resources
CPU utilization: Module 5 seconds 1 minute 5 minutes
1 RP 0% / 0% 1% 1%
1 SP 5% / 0% 5% 4%
7 69% / 0% 69% 69%
8 78% / 0% 74% 74%
Processor memory: Module Bytes: Total Used %Used
1 RP 176730048 51774704 29%
1 SP 192825092 51978936 27%
7 195111584 35769704 18%
8 195111584 35798632 18%
I/O memory: Module Bytes: Total Used %Used
1 RP 35651584 12226672 34%
1 SP 35651584 9747952 27%
7 35651584 9616816 27%
8 35651584 9616816 27%
Router#
This example shows how to display EOBC-related statistics for the route processor, the switch processor,
and the DFCs in the Cisco 7600 series router:
Router# show platform hardware capacity eobc
EOBC Resources
Module Packets/sec Total packets Dropped packets
1 RP Rx: 61 108982 0
Tx: 37 77298 0
1 SP Rx: 34 101627 0
Tx: 39 115417 0
7 Rx: 5 10358 0
Tx: 8 18543 0
8 Rx: 5 12130 0
Tx: 10 20317 0
Router#
This example shows how to display the current and peak switching utilization:
Router# show platform hardware capacity fabric
Switch Fabric Resources