Filter
Top Products
show rom-monitor
CF-865
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show rom-monitor
To show both the ReadOnly and the Upgrade ROM monitor (ROMMON) image versions in addition to
which ROMMON image is running on the Cisco 7200 VXR or Cisco 7301 router, use the show
rom-monitor command in user EXEC, privileged EXEC, or diagnostic mode.
Supported Platforms Other than the Cisco ASR1000 Series Routers
show rom-monitor
Cisco ASR 1000 Series Routers
show rom-monitor slot
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Diagnostic (diag)
Command History
slot Specifies the slot that contains the ROMMON. Options include:
• number—the number of the SIP slot that requires the ROMmon upgrade
• F0—Embedded-Service-Processor slot 0
• F1—Embedded-Service-Processor slot 1
• FP—All installed Embedded-Service-Processors
• R0—Route-Processor slot 0
• R1—Route-Processor slot 1
• rp active—active Route-Processor
• rp standby—standby Route-Processor
• fp active—active Embedded-Service-Processor
• fp standby—standby Embedded-Service-Processor
Release Modification
12.0(28)S This command was introduced on the Cisco 7200 VXR router.
12.3(9) This command was integrated into Cisco IOS Release 12.3(9) and
implemented on the Cisco 7301 router.
12.3(8)T This command was integrated into Cisco IOS Release 12.3(8)T.