Filter
Top Products
show gt64010 (7200)
CF-678
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show gt64010 (7200)
To display all GT64010 internal registers and interrupt status on the Cisco 7200 series routers, use the
show gt64010 command in EXEC mode.
show gt64010
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Usage Guidelines This command displays information about the CPU interface, DRAM/device address space, device
parameters, direct memory access (DMA) channels, timers and counters, and protocol control
information (PCI) internal registers. The information is generally useful for diagnostic tasks performed
by technical support only.
Examples The following is a partial sample output for the show gt64010 command:
Router# show gt64010
GT64010 Channel 0 DMA:
dma_list=0x6088C3EC, dma_ring=0x4B018480, dma_entries=256
dma_free=0x6088CECC, dma_reqt=0x6088CECC, dma_done=0x6088CECC
thread=0x6088CEAC, thread_end=0x6088CEAC
backup_thread=0x0, backup_thread_end=0x0
dma_working=0, dma_complete=6231, post_coalesce_frames=6231
exhausted_dma_entries=0, post_coalesce_callback=6231
GT64010 Register Dump: Registers at 0xB4000000
CPU Interface:
cpu_interface_conf : 0x80030000 (b/s 0x00000380)
addr_decode_err : 0xFFFFFFFF (b/s 0xFFFFFFFF)
Processor Address Space :
ras10_low : 0x00000000 (b/s 0x00000000)
ras10_high : 0x07000000 (b/s 0x00000007)
ras32_low : 0x08000000 (b/s 0x00000008)
ras32_high : 0x0F000000 (b/s 0x0000000F)
cs20_low : 0xD0000000 (b/s 0x000000D0)
cs20_high : 0x74000000 (b/s 0x00000074)
cs3_boot_low : 0xF8000000 (b/s 0x000000F8)
cs3_boot_high : 0x7E000000 (b/s 0x0000007E)
pci_io_low : 0x00080000 (b/s 0x00000800)
pci_io_high : 0x00000000 (b/s 0x00000000)
pci_mem_low : 0x00020000 (b/s 0x00000200)
pci_mem_high : 0x7F000000 (b/s 0x0000007F)
Release Modification
11.2 This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.