Filter
Top Products
A-3
Cisco CRS-1 Carrier Routing System 16-Slot Multishelf System Site Planning Guide
OL-7422-04
Appendix A Multishelf System Product IDs
Multishelf System Product IDs
OIM, single-width CRS-FCC-OIM-1S Optical interconnect module (OIM)
(1 required for each S2 fabric card in fabric card chassis)
OIM blank CRS-OIM-IMPEDANCE Blank carrier for each empty OIM slot
FM-LED CRS-FCC-LED Fiber module LED card (2 required for each fabric card chassis)
FM-LED blank CRS-FM-IMPEDANCE Blank carrier for each empty FM-LED slot
(required for EMI compliance and cooling)
Front cosmetics CRS-FCC-FRNT-CM Front cosmetics and cable management kit
(front door not included)
Rear cosmetics CRS-FCC-DRS-RR Rear cosmetics and cable management kit
(rear door not included)
Front door CRS-FCC-DRS-FR Front door for fabric card chassis
Rear door CRS-FCC-DRS-R Rear door for fabric card chassis
AC power grille CRS-FCC-ACGRILLE Front grille for AC power shelves
DC power grille CRS-FCC-DCGRILLE Front grille for DC power shelves
Line Card Chassis Components
Line card chassis
(complete)
CRS-16-LCC/M Cisco CRS-1 LCC
(with 2 route processors [RPs], S13 fabric cards, and optical
array cables)
Switch fabric card CRS-16-FC/M S13 switch fabric card (8 required for each chassis)
(replace existing fabric cards in line card chassis)
Distributed route
processor (DRP)
CRS-DRP-B Additional route processor for the system (optional)
(includes two cards, DRP CPU and DRP PLIM)
To order DRP cards separately, use the following IDs (both cards are required for DRP operation):
• CRS-DRP-B-CPU DRP card only (requires DRP PLIM)
• CRS-DRP-B-PLIM DRP PLIM only (requires DRP CPU)
Drill hole template CRS-LCC-DRILLTEMP Aluminum template showing where to drill the mounting holes to
secure the chassis to the floor
Chassis access template CRS-LCC-FLOORTEMP Mylar template showing chassis door swings and maintenance
access area
Outrigger kit CRS-16-LCC-ALTMNT Mounting kit for securing the chassis to the floor when primary
drill hole locations are not available
1. This card is not installed if the FCC has 22-port SCGE cards installed.
2. This card is not installed if the FCC has 2-port SCGE cards installed.
Table A-1 Multishelf System Product IDs (continued)
Component Product ID Description