Filter
Top Products
4-5
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
OL-1984-06
Chapter 4 Cabling the RF Switch With the Cisco uBR10012 CMTS Cable Interface Line Cards
RF Cable Assemblies
Figure 4-3 Cable Solution for the Cisco uBR 3x10 RF Switch and Cisco uBR10-LCP2-MC16x Line
Card
Figure 4-4 Cable Solution for the Cisco uBR 3x10 RF Switch and Cisco uBR10-LCP2-MC28x Line
Card
Header Blocks
The header block holds the MCX connectors that are connected to the individual coaxial cables. These
are Cisco MCX header blocks that mate to the Cisco uBR 3x10 RF Switch. Input cable kits have two
extra header blocks. Output cable kits do not have header blocks.
To
upconverter
Alignment
pins
Header block (top)
Bevel
MCX
connectors
(not used with
the MC16 card)
MCX
connectors
103291
F-connectors
Alignment pins
Header block (top)
Bevel
To
upconverter
MCX
connectors
82617
F-connectors