Cisco Systems uBR7100E Network Hardware User Manual


 
C-5
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Appendix C Cable Specifications
Fast Ethernet Port Cables and Pinouts
Figure C-3 RJ-45 Crossover Cable Identification
Identifying an RJ-45 Straight-Through Cable
You can identify a straight-through cable by comparing the two modular ends of the cable. Hold the
cables side-by-side with the tab at the back. The straight-through cable’s wires are in the same sequence
at both ends of the cable.
Figure C-4 RJ-45 Straight-Through Cable Identification
Note If your cable was purchased from Cisco Systems, pin 1 is white.
Table C-3 lists the pinouts for the two Fast Ethernet ports.
62741
Pin 1
Pin 2
Pin 3
Pin 6
62740
Pin 1 Pin 1
Table C-3 10BASE-T RJ-45 Connector Pinouts
RJ-45 Pin Description RJ-45 Pin Description
1Tx+ 3Rx+
2Tx 6Rx