Filter
Top Products
A-2
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Appendix A System Specifications
Physical Specifications
WAN interface options For a list of supported port adapters, refer to the “Port Adapters” section
on page 1-7 and Table 1-1 on page 1-8.
Note Additional port adapters may be added in future Cisco IOS
software releases. See the Cisco IOS software release notes for
your software release for the most recent list of supported port
adapters.
Recommended minimum
software requirements
Cisco IOS Release 12.1(5)EC or later release for DOCSIS operations
Cisco IOS Release 12.1(7)EC or later release for EuroDOCSIS
operations
Compliance marking CE, CSA, TUV, FCC, ICES, VCCI, AS/NZS, BSMI
Safety UL 1950, CSA 22.2 No. 950, EN60950, ACA TS001, AS/NZS 3260,
IEC 60950
EMC Emissions
5
CFR 47 part 15:1998 Class B; EN55022:1994 [incl AMD1+AMD2]
Class B; AS/NZS 3548:1995; CISP22:1997 Class B; VCCI:1997
ClassB; ICES-003:1994; CNS13438:1997 Class B
EMC Immunity EN61000-3-2:1995; EN61000-3-2:1995
6
1. Btu = British thermal units.
2. A = amperes.
3. W = watts.
4. cfm = cubic feet per minute.
5. EMC = electromagnetic compatibility.
6. Refer to Regulatory Compliance and Safety Information for the Cisco uBR7100 and Cisco uBR7100E Series Universal
Broadband Routers for more information.
Table A-2 Cisco uBR7100 Series Cable Interface Specifications
Router Model Downstream Modulation Upstream Modulation IF Output
1
1. This table shows the output from the DS0 downstream port, which does not use the integrated upconverter.
uBR7111 64 QAM QPSK +35 to +43 dBmV
uBR7114 64 QAM QPSK +35 to +43 dBmV
uBR7111E 64 QAM QPSK +33 to +38 dBmV
uBR7114E 64 QAM QPSK +33 to +38 dBmV
Table A-1 Physical Specifications and Power Requirements (continued)
Description Specification