Filter
Top Products
6-17
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Chapter 6 Maintenance
Upgrading the SDRAM Memory Modules
Figure 6-12 Replacing the Chassis Cover
Powering On the Router
To return power to the router, do the following:
Step 1 Verify that the chassis is properly grounded. Replace the ground connection, if necessary. See the
“Attaching the Ground Wire” section on page 3-5.
Step 2 Reconnect the network connections. See the “Connecting to the Network” section on page 3-8 and the
“Connecting the Console Port and Auxiliary Port” section on page 3-10.
Step 3 Connect the power cord to the chassis. See the “Connecting the Power” section on page 3-12.
Step 4 Connect the power cord to the AC outlet or other power source.
Note For more information, also see Memory Replacement Instructions for the Network Processing Engine or
Network Services Engine and Input/Output Controller at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/core/7206/fru/memory/index.htm
1 Cover screws 2 Tabs
1
116840
2
2
Cisco uBR7100
SERIES