Filter
Top Products
2-2
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Chapter 2 Preparing for Installation
Shipping Container Contents
Shipping Container Contents
Ensure that the correct Cisco uBR7100 series router is in the shipping container. The shipping container
includes the following items:
• Cisco uBR7100 series router with appropriate port adapter card installed. If the port adapter is not
installed, it should be installed, using the instructions that accompany the card, before the router is
installed.
• A rack-mount and cable-management kit that includes the following items:
–
Two rack-mount brackets for 19-inch rack installations
–
One cable-management bracket
–
Sixteen 3.5 x 8-mm Phillips flathead screws for securing the rack-mount brackets to the chassis
–
Two 3.5 x 7-mm slotted hexhead screws for securing the cable-management bracket to the
chassis
Note Four 10-32 x 3/8-inch slotted binderhead screws are required to secure the chassis to the
rack rails; the binderhead screws are not included in the rack-mount and
cable-management kit.
• Four Rubber feet for mounting the router on a tabletop
• Nylon cable tie
• Cable tie holder
• Ground lug kit that includes two M3.5 x 7-mm screws
• Rollover RJ-45 to RJ-45 cable for connecting the console or auxiliary port
• Female RJ-45-to-DB-9 adapter for connecting a PC running terminal emulation software to the
console port
• Male RJ-45-to-DB-25 adapter for connecting a modem to the auxiliary port for remote access
• Documentation roadmap
• Regulatory Compliance and Safety Information for the Cisco uBR7100 and Cisco uBR7100E Series
Universal Broadband Router
Note Depending on the exact model and bundle ordered, other materials, such as an evaluation copy of
Cisco Network Registrar (CNR), might also be included with the Cisco uBR7100 series router.
Keep the shipping container in case you must return the router to the factory.