Filter
Top Products
6-13
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
OL-5916-01
Chapter 6 Maintenance
Upgrading the SDRAM Memory Modules
Figure 6-6 Removing the Cover
Removing the SDRAM DIMM
To remove the existing DIMM, use the following procedure:
Step 1 Make sure that you are properly grounded.
Step 2 Locate the DIMM and position the chassis so that you are facing the DIMM module you want to remove.
Step 3 Open the DIMM latches on the DIMM to release the DIMM from the socket. (See Figure 6-8) The
DIMM is under tension in the socket; therefore, the DIMM might be released from the socket with some
force.
1 Cover screws 2 Tabs
1
116848
2
2
Cisco uBR7100
SERIES