Filter
Top Products
Disassembly, Reassembly and Lubrication
CL-S6621 3-48
7. Remove the “Carriage Adjust Sensor L” and other related parts.
1) Remove the 1 screw (BH, M3x4 (NI)) (), and detach the “Cover Sensor Cable L”.
2) Remove the 2 screws (BHT (PT), M2x6) () and detach the “Carriage Adjust Sensor
L”.
3) Remove the “Pinion Sensor L” and “Leaf Pinion Sensor L” from the “Carriage Adjust
Sensor L”.
4) Disengage the “E-Ring 3” (), remove the “Wave Washer 4x8xt0.15” and “Spacer, CR
Shaft”, and then detach the “Shaft Lead Screw”.
5) Remove the 1 screw (BH, M3x4 (NI)) () and detach the “Holder Screw L” and “Gear
Lead Screw L”.
6) Remove the “Sheet Blind” from the frame.
8. Remove the “SA, Head Up Switch”.
1) Remove the 1 screw (BH, M3x4 (NI)) () and detach the “Guide Cover Frame Pop Up”
Block. Then, remove the “Spring Pop Up” and “Pop Up Cover Frame” from the “Guide
Cover Frame Pop Up”.
2) Remove the 1 screw (No.0, PHT (BT #3), M1.7x7) () and detach the “SA, Head Up
Switch”.
FLOIL G-311S
a
Sheet Blind
Spring Pop Up
Pop Up Cover Frame
Guide Cover
Frame Pop Up
No.0, PHT (BT #3), M1.7x7
SA, Head Up Switch
BH, M3x4 (NI)
Cover Sensor Cable L
BH, M3x4 (NI)
Holder Screw L
Gear Lead Screw L
E-Ring 3
Wave Washer
4x8xt0.15
BH, M3x4 (NI)
Shaft Lead Screw
Pinion Sensor L
BHT (PT), M2x6
Leaf Pinion Sensor L
Carriage Adjust Sensor L
b
b
c
c
a
a
d
d
Wire Tie
Wire Tie
Spacer, CR Shaft