58
Appendixes
Specications
Item Description
Printing Printing method Thermal transfer/Direct thermal
Resolution Main scanning line density: 203 dots/inch (8 dots/mm)
Sub- scanning line density: 203 dots/inch (8 dots/mm)
Head 1344 dots (printable dots: 1344 dots)
Max. print width 168 mm 6.6 inch
Max. print length 2539.7 mm 99.99 inch
Print density Print density is adjustable with software
Printing speed Printing speed setting 6, 5, 4, 3 or 2 inches per second
Print mode Batch mode Normal printing (single or multiple sheets)
Tear o mode Feeds back media to the tear-o position after printing is completed.
Cut mode
*1
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through (Cut through refers to stopping present printing
to cut the previous label when it reaches the cut position. After
cutting, printing restarts but a gap may be created at the seam of
the printing at this time.)
Peel mode
*1
Peels labels from the liners after printing them.
Media
*2
Types of media Roll, fanfold
(continuous media, die-cuts, continuous tags. paper or tickets)
Recommended media Thermal transfer: label media (LR1111 Lintec)
Direct thermal media: label media (150LA-1 Ricoh), tag media
(130LHB Ricoh)
Max. media width 178.0 mm 7.01 inch
Min. media width 50.0 mm 1.97 inch
Min. label width 50.0 mm 1.97 inch
Min. label pitch
*3
19.0 mm 7.48 inch
Max. media thickness 0.254 mm 0.01 inch
Max. media length 2539.7 mm 99.99 inch
Min. media length 16.0 mm 6.30 inch
Min. media thickness 0.0635 mm 0.0025 inch
On-board roll media
diameter
Max. external diameter: 127 mm 5 inch
Media core: 25.4 to 76 mm
Min. media core external diameter
(when using label media): 50.8 mm
1 to 3 inch
2 inch
