Filter
Top Products
4-2 Chapter 4, Advanced Diagnostics Program
Addendum 108431-001 (11-88) to
Manual No. 108033-003
6. Turn on the computer and monitor.
Once POST completes successfully, the
screen displays a list of the devices in-
stalled.
NOTE: The F1 function key can be used
anytime during SETUP to access
HELP.
7. Verify that the POST program has correctly
detected the devices installed.
□ If listed correctly, enter Y (yes) and
proceed to the main menu of AD-
VANCED DIAGNOSTICS.
□ If listed incorrectly, enter N (no) and
follow the instructions on the screen.
4.2 MAIN MENU
The main menu allows you to select one of the
following:
□ Run the diagnostic tests
□ Format a diskette (for diagnostic use only)
□ Run the SETUP program
□ Clear configuration and run the SETUP
program
□ Display ROM versions
These selections are described in the following
paragraphs.
Run the Diagnostic Tests
This selection presents the menu-selectable tests
and methods of testing.