13-5
Writer: Carey Gregg Project: Comments: 113733-001
File Name: N-CH13.doc Last Saved On: 4/1/99 3:27 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
1. Turn off the computer.
2. Unplug the AC Adapter and disconnect any external devices.
3. Turn the computer bottom side up.
4. Remove the RTC battery cover (refer to "Bottom Components" in
Chapter 2).
5. Lift the RTC battery from the compartment, and use tweezers to gently
disconnect the connector.
6. Insert the new RTC battery plug into the keyed connector.
7. Position the RTC battery inside the compartment so that the wires are
underneath the battery disc.
8. Replace the battery cover and turn the computer top side up.
9. Reconnect the AC Adapter and any external devices.
10. Turn on the computer, then run Computer Setup to reconfigure the
system (refer to Chapter 14, "Configuration and Diagnostic Utilities").
To dispose of the old RTC battery, consult the Battery Notice in Appendix B.
Caring for the Computer
WARNING: To reduce the risk of electric shock or damage to
internal components, do not allow liquids to drip into the
computer keyboard.
CAUTION: To prevent possible damage to the display, do not
place anything on top of the computer when it is closed.
CAUTION: Soap or other cleaning products can damage the
screen and discolor the plastic.
■ Keep the computer away from excessive moisture and temperature
extremes. Do not expose the computer to liquids or precipitation.
■ Avoid exposing the computer to direct sunlight or strong ultraviolet light
for extended periods of time.