Filter
Top Products
5-2 Upgrading Your Computer
Writer: J Abercrombie Project: Chapter 5 Comments: 113733-001
File Name: F-CH05.doc Last Saved On: 5/14/99 3:42 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Removing or Inserting a
Memory Expansion Board
WARNING: The memory compartment and the real time clock
battery compartment are the only user-accessible internal
compartments on the computer. All other areas that require a tool
to access should be opened only by a Compaq authorized service
provider.
WARNING: Failure to unplug the power cord and remove
the battery pack before installing a memory expansion board
can damage the equipment and expose you to the risk of
electrical shock.
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning this procedure, ensure that you are
properly grounded. For more information, refer to Appendix C,
“Electrostatic Discharge.”
NOTE: There is only one memory expansion slot in the computer. Before
upgrading memory, you must remove the memory board that came with the
computer.
1. Shut down the computer.
NOTE: To ensure that the computer is not in hibernation, turn the computer
on, then shut it down.
2. Disconnect all external devices connected to the computer.
3. Disconnect the AC Adapter and remove the battery pack from the
computer.