Compaq M300 Personal Computer User Manual


 
7-3
Writer: Carey Gregg Project: Comments: 113733-001
File Name: H-CH07.doc Last Saved On: 5/18/99 3:03 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
The internal modem supports
Standard analog modem communication protocols (for speeds
up to 33.6 Kbps).
ITU-compatible V.90 and 56K protocols (for higher speeds).
The V.90 protocols allow faster downloads only from V.90
K56flex–compliant digital sources. Maximum achievable download
transmission rates are currently unknown, may not reach 56Kbps,
and will vary with line conditions.
Using Modem Commands and Dial Modifiers
You can configure most communications software without the use of AT
commands or dial modifiers.
If you prefer to configure the modem using AT commands, select
StartÅProgramsÅAccessoriesÅHyperTerminal.
To access an AT command set including dial modifiers and instructions,
go to the Compaq Internet site at
http://www.compaq.com/support/portables.
Setting Modem Preferences
The following preference is in addition to those described in your modem
communication software documentation.
In Windows 95 only—To set the computer to turn on when the modem
receives a telephone call, select StartÅSettingsÅControl
PanelÅPowerÅPower tabÅAdvanced button, then select the Wake Up the
Computer When the Phone Rings check box.
Using the Modem
The internal modem supports all operations described in most communications
software documentation.
If you are using a fax application, the following supplementary information may
be helpful.