Filter
Top Products
4-21
Writer: J Abercrombie Project: Chapter 4 Comments: 113733-001
File Name: E-CH04.doc Last Saved On: 5/18/99 2:44 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Setting Power Preferences in Windows 95 or Windows NT 4.0
Continued
Set computer to initiate Hibernation rather
than Suspend.
Select Power (or Compaq Power in
Windows NT)ÅHibernation tab, then
select Standby in the Timeout drop-down
list.
In Windows 95, turn off power to an optional
PC Card modem.
Select PowerÅPC Card Modems tab,
then select Turn Off Power to PC Card
Modem When Not in Use check box.
Change location of Hibernation file. Select Power (or Compaq Power in
Windows NT)ÅHibernation tab, then
select the new location from the Drive for
Hibernation File drop-down list.
Enable/Disable Hibernation. Select Power (or Compaq Power in
Windows NT)ÅHibernation tab, then
select the On or Off button.
CAUTION: If the computer reaches a
critical low-battery condition while
Hibernation is turned off, unsaved work
can be lost.
Setting Power Preferences in Windows 98
To access most power settings—Select StartÅ SettingsÅControl
PanelÅPower Management. For information about setting all Power
Management settings except the following, refer to your Windows98
documentation.
To enable or disable hibernation—Select the hibernation tab, then select the
on or off button.
To set a screen brightness level that applies when the computer is running
on a battery pack—Select Power ManagementÅBattery Conservation Settings
tab, then select a percent from the Brightness drop-down list.