Filter
Top Products
Removing and Installing Parts 135
11
Attach the power and data cables to the floppy drive.
12
Connect the other end of the data cable to the connector labeled
"FLOPPY" on the system board (see "System Board Components" on
page 107) and route the cable through the clip on the shroud.
13
Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
14
Replace the CD or DVD drive. (see "Installing a CD or DVD Drive" on
page 143).
15
Replace the bezel (see "Replacing the Bezel" on page 124).
16
Replace the computer cover (see "Replacing the Computer Cover" on
page 165).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 floppy drive 2 spring clamp 3 CD or DVD drive
2 3*1
book.book Page 135 Wednesday, April 16, 2008 3:33 PM