Filter
Top Products
Removing and Installing Parts 141
NOTE: Ensure that the Media Card Reader is installed before the FlexBay
cable is connected.
12
Connect the FlexBay USB cable to the back of the Media Card Reader and
to the internal USB connector on the system board (see "System Board
Components" on page 107).
13
Replace the CD or DVD drive. (see "Installing a CD or DVD Drive" on
page 143).
14
Replace the bezel (see "Replacing the Bezel" on page 124).
15
Replace the computer cover (see "Replacing the Computer Cover" on
page 165).
16
Connect your computer and devices to electrical outlets, and then turn
them on.
CD or DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before opening the cover.
1 Media Card Reader 2 spring clamp 3 CD or DVD drive
2
3
1
book.book Page 141 Wednesday, April 16, 2008 3:33 PM