Filter
Top Products
140 Removing and Installing Parts
8
Place the Media Card Reader in the FlexBay drive cage and slide it towards
the cage notch to align the cage notch with the notch holes in the floppy
drive.
9
Align the two screw holes on the floppy drive with the FlexBay drive cage.
10
Tighten the two screws to secure the floppy drive in the FlexBay drive cage.
11
Slide the FlexBay drive cage along with the floppy drive in the FlexBay slot
till it snaps in place.
1 Media Card Reader 2 screws (2) 3 spring clamp (2)
4 notch hole (2) 5 cage notch (2) 6 floppy drive cage
2
3
1
4
5
6
book.book Page 140 Wednesday, April 16, 2008 3:33 PM