Filter
Top Products
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.
System
System Info
Displays the Computer name, BIOS Version number, BIOS Date, Service Tag, Express Service Code, and Asset Tag.
Processor Info
Displays the following information for the processor installed in the system: Processor Type, Processor Clock Speed, Processor Bus
Speed, Processor Cache Size, Processor ID number, whether the processor is Hyperthreading or Multi-core Capable, and if the
processor supports 64-bit Technology.
Memory Info
Displays the amount of Installed Memory, Memory Speed, Memory Channel Mode, and a description of the Memory Technology. This
option also displays a table that describes the memory size, whether the memory module is ECC capable, single or dual rank, type, and
organization.
PCI Info
Displays the contents of each PCI, PCI Express, and PCI-X slot.
Date/Time
Controls the system's internal calendar and clock.
Boot Sequence
(Diskette drive
default)
Determines the order in which the system searches for boot devices during system startup.
NOTE: If you insert a boot device and restart the computer, this option appears in the system setup menu. To boot from a USB memory
device, select the USB device and move it so it becomes the first device in the list.
Drives
SAS Controller
(On default)
Enables or disables the internal SAS controller.
Diskette Drive
(Internal
default)
Enables and disables the floppy drives and sets read permission for the internal floppy drive. Off disables all floppy drives. USB disables
the internal diskette drive and enables a USB floppy drive, if the USB controller is enabled and a USB drive is connected. Internal enables
the internal floppy drive. Read Only enables the internal drive controller and allows the internal floppy drive read-only permission.
NOTE: Operating systems with USB support will recognize USB floppy drives regardless of this setting.
Drives 0
through 2
(On default)
Enables or disables a SATA drive. On enables the interface so that the device can be used.
Displays the Controller type (SATA), Port number the drive is using, Drive ID number, and Capacity.
Drives 3
through 4
(On default)
EnablesordisablesaPATAdevice(suchasaCDorDVDdrive).On enables the interface so that the device can be used.
Displays the Controller type (ATA), Port number the drive is using, DriveID number, Capacity, and whether the drive is controlled by the
BIOS.
SATA Operation
(AHCI default)
Determines the integrated SATA controller's operating mode, which can be either AHCI or ATA.
Onboard Devices
Integrated
Enables or disables the integrated NIC controller. Settings are On, Off, On w/RPL, or On w/ PXE. When the On w/ PXE or the On w/RPL