Filter
Top Products
4. Remove the drive panel (see Removing the Drive Panel).
5. If you are installing a new drive, remove the drive-panel insert from a 5.25-inch drive bay (see Removing a Drive-Panel Insert).
If you already have a drive installed in the drive bay, remove the optical or hard drive. See the appropriate removal instructions.
6. Place the SATA hard drive in the hard-drive bracket and press the drive down until it snaps securely into place.
7. Slide the hard drive in the hard-drive bracket into the hard-drive carrier.
8. Slide the hard-drive carrier into the 5.25-inch drive bay until it is securely seated.
1
hard drive
2
hard-drive bracket
1
hard-drive carrier
2
hard drive in hard-drive bracket
1
sliding-plate lever
2
hard-drive carrier with hard drive