Filter
Top Products
8. Attach the power and data cables to the floppy drive.
9. Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see System Board
Components.
10. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
11. Reinstall the drive panel (see Replacing the Drive Panel).
12. Replace the computer cover (see Replacing the Computer Cover).
13. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
1
floppy drive
2
floppy drive carrier
1
power cable
2
data cable
3
floppy-drive connector (DSKT)
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.