Filter
Top Products
11. Ensure that all connectors are properly cabled and firmly seated.
12. Replace the computer cover (see Replacing the Computer Cover).
13. Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
14. If the drive you just installed is the primary drive, insert bootable media into drive A.
15. Turn on the computer.
16. Enter system setup, and update the appropriate Drive option (see System Setup).
17. Exit system setup, and reboot the computer.
18. Partition and logically format your drive before you proceed to the next step.
1
power cable
2
data cable
3
HDD connector
1
power cable
2
data cable
3
SAS interposer connector
4
HDD connector
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.