Filter
Top Products
Drives 137
4
Attach the power and data cables to the floppy drive.
5
Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into
place.
6
Replace the optical drive (see "Optical Drive" on page 131).
7
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
8
Replace the computer cover (see "Replacing the Computer Cover" on page 317).
9
Enter system setup and set the
Diskette Drive
option to enable your new floppy drive (see "System
Setup" on page 280).
10
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 353).
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
1 power cable
2 slot verification number
1 2