Filter
Top Products
206 Drives
7
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
8
Replace the computer cover (see "Replacing the Computer Cover" on page 317).
9
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
10
Enter system setup and select the appropriate
Drive
option (see "System Setup" on page 280).
11
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 353).
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 21.
2
Remove the computer cover (see "Removing the Computer Cover" on page 168).
3
Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
4
Remove the optical drive and carefully set it aside (see "Optical Drive" on page 204).