Filter
Top Products
148 Drives
11
Replace the optical drive (if your configuration has one). See "Installing an Optical Drive" on page 132.
12
Replace the computer cover (see "Replacing the Computer Cover" on page 317).
13
Turn on the computer.
14
Enter system setup, and update the SATA port option under the
Drives
option list (see "Entering
System Setup" on page 280).
15
Exit system setup, and reboot the computer.
16
Partition and logically format your drive.
NOTE: For instructions, see the documentation that came with your operating system.
17
Test the hard drive by running the Dell Diagnostics (see "Dell Diagnostics" on page 353).
18
Install your operating system on the hard drive.
NOTE: For instructions, see the documentation that came with your operating system.
1 data cable 2 hard drive system board
connector
21