Filter
Top Products
100 Clock
www.dell.com | support.dell.com
sntp anycast client enable
The
sntp anycast client enable
Global Configuration mode command enables anycast client. To
disable the polling for SNTP broadcast client, use the
no
form of this command.
Syntax
sntp anycast client enable
no sntp anycast client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration
User Guidelines
• Polling time is determined by the
sntp client poll timer
Global Configuration mode
command.
• Use the
sntp client enable
Interface Configuration mode command to enable the SNTP
client on a specific interface.
Examples
The following example enables anycast clients.t
sntp client enable (interface)
The
sntp client enable
Interface Configuration mode command enables the Simple Network Time
Protocol (SNTP) client on an interface. This applies to both receive broadcast and unicast updates.
To disable the SNTP client, use the
no
form of this command.
Syntax
sntp client enable
no sntp client enable
This command has no arguments or keywords.
Default Configuration
Disabled
Console (config-if)# sntp anycast client enable