Filter
Top Products
Command Groups 39
System Management Commands
TACACS Commands
Command Group Description Access Mode
ping Sends ICMP echo request packets to another
node on the network.
User EXEC
traceroute Discovers the routes that packets will actually take
when traveling to their destination.
User EXEC
telnet Logs in to a host that supports Telnet.
User EXEC
resume Switches to another open Telnet session
User EXEC
reload
Reloads the operating system
Privileged User
EXEC
hostname Specifies or modifies the device host name. Global
Configuration
show users Displays information about the active users. User EXEC
show sessions Lists the open Telnet sessions.
User EXEC
show system Displays system information. User EXEC
show version Displays the system version information. User EXEC
asset-tag Specifies the device asset-tag. Global
Configuration
show system id Displays the service ID information. User EXEC
Command Group Description Mode
tacacs-server host Specifies a TACACS+ host. Global
Configuration
tacacs-server key Sets the authentication encryption key used for all
TACACS+ communications between the device
and the TACACS+ daemon.
Global
Configuration
tacacs-server source-ip Specifies the source IP address that will be used
for the communication with TACACS servers.
Global
Configuration
tacacs-server timeout Sets the timeout value. Global
Configuration
show tacacs Displays configuration and statistics for a
TACACS+ servers.
Privileged User
EXEC