Dell 5324 Switch User Manual


 
SNMP Commands 245
Syntax
snmp-server location
text
no snmp-server location
text
—Character string, up to 160 characters, describing the system location.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string.
Example
The following example sets the device location as "New_York".
snmp-server enable traps
The
snmp-server enable traps
Global Configuration mode command enables the switch to send
SNMP traps. To disable SNMP traps use the
no
form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
Enabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable SNMP traps.
Console (config)# snmp-server location New_York
Console (config)# snmp-server enable traps