Filter
Top Products
244 SNMP Commands
www.dell.com | support.dell.com
User Guidelines
• You can enter this command multiple times for the same filter record. Later lines take
precedence when an object identifier is included in two or more lines. .
Example
The following example creates a filter that includes all objects in the MIB-II system group except
for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group:
snmp-server contact
The
snmp-server contact
Global Configuration mode command sets up a system contact. To
remove the system contact information, use the
no
form of the command.
Syntax
snmp-server contact
text
no snmp-server contact
•
text
—Character string, up to 160 characters, describing the system contact information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Do not include spaces in the text string.
Example
The following example displays setting up the system contact point as "Dell_Technical_Support".
snmp-server location
The
snmp-server location
Global Configuration mode command sets up information on where the
device is located. To remove the location string use, the
no
form of this command.
Console (config)# snmp-server view user-view system included
Console (config)# snmp-server view user-view system.7 excluded
Console (config)# snmp-server view user-view ifEntry.*.1
included
Console (config)# snmp-server contact Dell_Technical_Support