Filter
Top Products
220 Radius Commands
www.dell.com | support.dell.com
Command Mode
Global Configuration mode
User Guidelines
• To specify multiple hosts, multiple
radius-server host
commands can be used.
• If no host-specific timeout, retransmit, deadtime or key values are specified, the global values
apply to each host.
• The address type of the source parameter must be the same as the ip-address parameter.
Example
The following example specifies a RADIUS server host with the following characteristics:
• Server host IP address—192.168.10.1
• Authentication port number—20
• Timeout period—20 seconds
radius-server key
The
radius-server key
Global Configuration mode command sets the authentication and
encryption key for all RADIUS communications between the device and the RADIUS daemon. To
reset to the default, use the
no
form of this command.
Syntax
radius-server key
[key-string]
no radius-server key
•
key-string
—Specifies the authentication and encryption key for all RADIUS
communications between the device and the RADIUS server. This key must match the
encryption used on the RADIUS daemon. The key can be up to 128 characters long.
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Console (config)# radius-server host 192.168.10.1 auth-port 20
timeout 20