Filter
Top Products
70 AAA Commands
www.dell.com | support.dell.com
ip https authentication
The
ip https authentication
Global Configuration mode command specifies authentication
methods for https servers. To return to the default, use the
no
form of this command.
Syntax
ip https authentication
method1
[
method2
...]
no ip https authentication
•
method1
[
method2
...]—Specify at least one from the following table:
Default Configuration
The local user database is checked. This has the same effect as the command
ip https
authentication local
.
Command Mode
Global Configuration mode
User Guidelines
• The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify
none
as the final method in the command line.
Example
The following example configures https authentication.
show authentication methods
The
authentication methods
Privilege EXEC mode command displays information about the
authentication methods.
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS servers for authentication.
Console (config)# ip https authentication radius local
Console (config)# ip https authentication tacacs local