Dell 5324 Switch User Manual


 
82 Address Table Commands
www.dell.com | support.dell.com
Syntax
bridge multicast forbidden forward-all
{
add
|
remove
}
{
ethernet
interface-list | port-channel
port-channel-number-list
}
no bridge multicast forward-all
add
—Forbids forwarding all multicast packets.
remove
—Does not forbid forwarding all multicast packets.
interface-list
—Separates non consecutive valid Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
port-channel-number-list
—Separates non consecutive valid port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
By default, this setting is disabled (for example, forwarding to the port is not forbidden).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
IGMP snooping dynamically discovers multicast router ports. When a multicast router port is
discovered, all the multicast packets are forwarded to it unconditionally.
This command prevents a port to be a multicast router port.
Example
In this example, forwarding all multicast packets to g6 are forbidden.
bridge aging-time
The
bridge aging-time
Global Configuration mode command sets the address table aging time. To
restore the default, use the
no
form of the
bridge aging-time
command.
Syntax
bridge aging-time
seconds
no bridge aging-time
Console (config)# interface vlan 2
Console (config-if)# bridge multicast forbidden forward-all add
ethernet g6