Filter
Top Products
Radius Commands 223
radius-server deadtime
The
radius-server deadtime
Global Configuration mode command improves RADIUS response
times when servers are unavailable. The command is used to cause the unavailable servers to be
skipped. To reset the default value, use the
no
form of this command.
Syntax
radius-server deadtime
deadtime
no radius-server deadtime
•
deadtime
—Length of time in minutes, for which a RADIUS server is skipped over by
transaction requests. (Range: 0 - 2000)
Default Configuration
The default dead time is 0 minutes.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example sets a dead time where a RADIUS server is skipped over by transaction
requests for this period, to 10 minutes.
show radius-servers
The show radius-servers User EXEC mode command displays the RADIUS server settings.
Syntax
show radius-servers
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Console (config)# radius-server deadtime 10