Filter
Top Products
174 Line Commands
www.dell.com | support.dell.com
Command Mode
Line Configuration (console) mode
User Guidelines
• The configured speed would be applied when Autobaud is disabled.
• If Autobaud is disabled, the new speed is implemented immediately.
Examples
The following example sets the baud rate to 9600.
autobaud
The
autobaud
Line Configuration mode command sets the line for automatic baud rate detection
(autobaud). Use the
no
form of this command to disable automatic baud rate detection.
Syntax
autobaud
no autobaud
Default Configuration
Disabled
Command Mode
Line Configuration (console) mode
User Guidelines
• To start communications using automatic baud detection, press the Enter key twice.
Examples
The following example sets the line for automatic baud rate detection.
exec-timeout
The
exec-timeout
Line Configuration mode command sets the interval that the system waits until
user input is detected. To restore the default setting, use the
no
form of this command.
Console (config)# line console
Console(config-line)# speed 9600
Console (config)# line console
Console(config-line)# autobaud