Filter
Top Products
Radius Commands 221
Example
The following example sets the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon to "dell-server".
radius-server retransmit
The
radius-server retransmit
Global Configuration mode command specifies the number of times
the software searches the list of RADIUS server hosts. To reset the default configuration, use the
no
form of this command.
Syntax
radius-server retransmit
retries
no radius-server retransmit
•
retries
—Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS
server hosts to 5 attempts.
radius-server source-ip
The
radius-server source-ip
Global Configuration mode command specifies the source IP address
used for communication with RADIUS servers. To return to the default, use the
no
form of this
command.
Syntax
radius-server source-ip
source
no radius-server-ip
source
•
source
—Specifies the source IP address.
Console (config)# radius-server key dell-server
Console (config)# radius-server retransmit 5