Filter
Top Products
RMON Commands 227
rmon collection history
The
rmon collection history
Interface Configuration mode command enables a Remote
Monitoring (RMON) MIB history statistics group on an interface. To remove a specified RMON
history statistics group, use the
no
form of this command.
Syntax
rmon
collection history
index
[
owner
ownername
] [
buckets
bucket-number
] [
interval
seconds
]
no rmon collection history
index
•
index
—The requested statistics index group. (Range: 1 - 65535)
•
owner
ownername
—Records the RMON statistics group owner name. If unspecified, the
name is an empty string.
•
buckets
bucket-number
—A value associated with the number of buckets specified for the
RMON collection history group of statistics. If unspecified, defaults to 50.
(Range: 1 - 65535)
•
interval
seconds
—The number of seconds in each polling cycle. If unspecified, defaults to
1800. (Range: 1 - 3600)
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
• This command cannot be executed on multiple ports using the
interface range ethernet
command.
256 to 511 Octets The total number of packets (including bad packets) received that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
512 to 1023 Octets The total number of packets (including bad packets) received that are
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
1024 to 1518 Octets The total number of packets (including bad packets) received that are
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).