Filter
Top Products
AAA Commands 69
ip http authentication
The
ip http authentication
Global Configuration mode command specifies authentication
methods for http. To return to the default, use the
no
form of this command.
Syntax
ip http authentication
method1
[
method2
...]
no ip http authentication
•
method1
[
method2
...]—Specify at least one from the following table:
Default Configuration
The local user database is checked. This has the same effect as the command
ip http
authentication local
.
Command Mode
Global Configuration mode
User Guidelines
• The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify
none
as the final method in the command line.
Example
The following example configures the http authentication.
Console (config)# line console
Console (config-line)# enable authentication default
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS servers for authentication.
Console (config)# ip http authentication radius local
Console (config)# ip http authentication tacacs local