Dell 5324 Switch User Manual


 
314 System Management
www.dell.com | support.dell.com
Examples
The following example displays a ping to IP address 10.1.1.1.
traceroute
The
traceroute
User EXEC mode command discovers the routes that packets will actually take
when traveling to their destination.
Syntax
traceroute
ip-address
|
hostname
[
size
packet_size
] [
ttl
max-ttl
] [
count
packet_count
]
[
timeout
time_out
] [
source
ip-address
] [
tos
tos
]
ip-address—
IP address of the destination host. (Range: Valid IP Address)
hostname—
Hostname of the destination host (Range: 1 - 158 characters)
size
packet_size—
Number of bytes in a packet. (Range: 40-1472)
ttl
max-ttl—
The largest TTL value that can be used. The
traceroute
command
terminates when the destination is reached or when this value is reached. (Range:1-255)
count
packet_count—
The number of probes to be sent at each TTL level. (Range:1-10)
timeout
time_out—
The number of seconds to wait for a response to a probe packet.
(Range:1-60)
Console> ping 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11