Filter
Top Products
34 Command Groups
www.dell.com | support.dell.com
RMON Commands
SNMP Commands
Command Group Description Mode
show rmon statistics Displays RMON Ethernet Statistics. User EXEC
rmon collection history Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Interface
Configuration
show rmon collection
history
Displays the requested history group configuration. User EXEC
show rmon history Displays RMON Ethernet Statistics history. User EXEC
rmon alarm Configures alarm conditions. Global
Configuration
show rmon alarm-table Displays the alarms summary table. User EXEC
show rmon alarm Displays alarm configurations. User EXEC
rmon event Configures a RMON event. Global
Configuration
show rmon events Displays the RMON event table. User EXEC
show rmon log Displays the RMON logging table. User EXEC
rmon table-size Configures the maximum RMON tables sizes. Global
Configuration
Command Group Description Access Mode
snmp-server community Sets up the community access string to permit access
to SNMP protocol.
Global
Configuration
snmp-server view Creates or update a view entry, Global
Configuration
snmp-server filter Create or update a filter entry, Global
Configuration
snmp-server contact Sets up a system contact. Global
Configuration
snmp-server location Sets up the information on where the device is located. Global
Configuration
snmp-server enable traps Enables the switch to send SNMP traps or SNMP
notifications.
Global
Configuration
snmp-server trap
authentication
Enables the switch to send Simple Network
Management Protocol traps when authentication
failed.
Global
Configuration